Skip to content
Snippets Groups Projects
Select Git revision
  • main default protected
1 result
Blame Permalink
README.md 17.20 KiB

Installation and deployment of 5G Core (5GC) of Open Air Interface (OAI)

Objectives

  • Install and configure the 5GC of OAI in a virtual machine Ubuntu 20.04 LTS (Focal Fossa)
  • Deploy 5GC Core
  • Inspec 5G Core Docker containers by means of command line instructions
  • Install and configure Portainer tool
  • Inspec 5G Core Docker containers by means of Portainer browser

Minimum hardware requirements for OAI UE, according to doc/NR_SA_Tutorial_COTS_UE.md · develop · oai / openairinterface5G · GitLab (eurecom.fr):

  • Ubuntu 20.04.5 LTS;
  • CPU: 4 cores x86_64;
  • 8 GB RAM.

Minimum hardware requirements for OAI 5GC and OAI gNB, according to doc/NR_SA_Tutorial_COTS_UE.md · develop · oai / openairinterface5G · GitLab (eurecom.fr):

  • Ubuntu 20.04.5 LTS;
  • CPU: 8 cores x86_64 3.5 GHz;
  • 32 GB RAM.

However, if you do not have such hardware specifications, you may use the one below for both devices (tested for us, you may face some lags, but it works):

  • Ubuntu 20.04.5 LTS;
  • CPU: 4 cores x86_64;
  • 4 GB RAM.

5GC Installation

ALT

In a Linux Terminal, follow the steps below:

Step 0: Setup your VM or Baremetal Machine, after install Useful Software:

sudo su

apt update -y

apt upgrade -y

apt install -y python3-pip git curl cmake tree golang vim net-tools build-essential nfs-common openssh-server

Step 1: Install dependencies

sudo apt-get install ca-certificates

sudo apt-get install curl

sudo apt-get install gnupg

sudo apt-get install lsb-release

Step 2: Enable packet forwarding

sudo sysctl net.ipv4.conf.all.forwarding=1

sudo iptables -P FORWARD ACCEPT

Step 3: Install docker and docker-compose

sudo rm /etc/apt/sources.list.d/docker.list*

sudo mkdir -p /etc/apt/keyrings

curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -

sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"

sudo chmod a+r /etc/apt/keyrings/docker.gpg

sudo apt-get update

sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-compose-plugin

sudo curl -L https://github.com/docker/compose/releases/download/1.29.2/docker-compose-`uname -s-uname -m` -o /usr/local/bin/docker-compose

sudo chmod +x /usr/local/bin/docker-compose

Step 4: Clone OpenAirInterface 5G Core repository

git clone https://gitlab.eurecom.fr/oai/cn5g/oai-cn5g-fed.git

cd oai-cn5g-fed

git checkout slicing-spring-of-code

OAI 5G RAN, RIC (FlexRIC) and OAI UE Installations

ALT

Objectives

  • Install the OAI 5G RAN (gNB)
  • Install the FlexRIC
  • Install OAI UE

To install OAI RAN 5G and OAI UE, go back for /home/your user and follow this tutorial.

Step 0: go back to /home/your user. In a Linux Terminal, type:

sudo su

cd /home/your user

Step 1: Install dependencies

sudo add-apt-repository ppa:ettusresearch/uhd

sudo apt-get install libuhd-dev uhd-host -y

sudo apt-get install libuhd4.6.0 -y

sudo apt-get install ccache -y

sudo apt-get install net-tools

Step 2: Fix problem in the libuhd. When you run the commands below, if you get the error "cannot access archive", you can continue to the next step. sudo dpkg -i --force-overwrite /var/cache/apt/archives/libuhd4.6.0_4.6.0.0-0ubuntu1~focal1_amd64.deb

Step 3: Clone OpenAirInterface 5G RAN repository

git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git

cd /home/your user/openairinterface5g

git checkout slicing-spring-of-code

Step 4: Run the installation script

source oaienv

cd cmake_targets

sudo ./build_oai -I

sudo ./build_oai -I --install-optional-packages

sudo ./build_oai -w USRP --ninja --gNB --nrUE -C --build-lib "uescope nrscope telnetsrv"

To install RIC (FlexRIC), go back to /home/your user and follow this tutorial.

Step 0: go back to /home/your user. In a Linux Terminal, type:

sudo su

cd /home/your user

Step 1: Install dependencies:

sudo apt-get install -y autotools-dev automake g++ make libpcre2-dev byacc cmake python3-dev libsctp-dev pcre2-utils bison

Step 2: Install swig:

cd /home/your user

git clone https://github.com/swig/swig.git

cd swig

git checkout release-4.1

./autogen.sh

./configure --prefix=/usr/

make -j8

sudo make install

Step 3: Clone FlexRIC repository:

git clone https://gitlab.eurecom.fr/mosaic5g/flexric flexric

cd flexric/

git checkout slicing-spring-of-code

Step 4: Build FlexRIC:

mkdir build && cd build && cmake .. && make -j8

sudo make install

RAN (gNB) Configuration

In a Linux Terminal, follow the steps below:

Step 1: Configure the PLMN and TAC values

The Public Land Mobile Network (PLMN) and Tracking Area Code (TAC) will be configured in the gNB (/home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf) configuration file.

Figure below shows the part of the code that must be modified in the CU and DU files (lines 17 and 18). The parameters shown in figure should be modified according to the values present in the template, , specifically "plmn_support_list" session (/home/dco1020/oai-cn5g-fed/docker-compose/conf/slicing_base_config.yaml).

ALT

Figure below shows the parameters that should be checked and passed to the monolithic configuration file: tac (referring to "tracking_area_code"), mcc (referring to "mcc"), mnc (referring to "mnc"), sst (referring to "sst") and the sd (referring to "sd").

ALT

Open files by typing:

gedit /home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf

gedit /home/dco1020/oai-cn5g-fed/docker-compose/conf/slicing_base_config.yaml

Step 2: Configure the network interfaces

This part you will configure the N2 interface in (/home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf), such as in figure below. This interface is responsible to connect the gNB and the AMF.

ALT

You need to verify/change the IP addresses. You can find the OAI-AMF IP address inside /home/dco1020/oai-cn5g-fed/docker-compose/docker-compose-slicing-basic-nrf.yaml, such as in figure below. You must get this IP address and put it in the "amf_ip_address" parameter, in the "ipv4" field (such as in previous figure).

ALT

Check if the IP Address of cu_gnb.conf is the same of docker-compose-basic-nrf.yaml. To edit cu_gnb.conf, type:

gedit /home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/cu_gnb.conf

Step 3: to check a virtual interface (demo-oai), type:

ip -br -c a

You should find a virtual interface (demo-oai) (as shown in figure below). This interface serves to connect the CU with OAI-AMF. You must get its IP address and name to configure the N2 interface such as two figures before.

ALT

UE 1 Configurations

Objectives

  • Configure the OAI UE 1

Step 1: Creating a namespace:

sudo ip netns add oai-ue1

Step 2: Creating a pair of virtual interfaces (veth):

sudo ip link add veth0 type veth peer name veth1

Step 3: Moving one interface to the created namespace:

sudo ip link set veth1 netns oai-ue1

Step 4: Configuring an IP address for veth0 interface:

sudo ip addr add 192.168.1.1/24 dev veth0

Step 5: Configuring an IP address for veth1 interface within the namespace:

sudo ip netns exec oai-ue1 ip addr add 192.168.1.2/24 dev veth1

Step 6: Bringing up the veth0 interface:

sudo ip link set veth0 up

Step 7: Bringing up the veth1 interface within the namespace:

sudo ip netns exec oai-ue1 ip link set veth1 up

Step 8: Adding a route within the namespace:

sudo ip netns exec oai-ue1 ip route add 192.168.70.0/24 via 192.168.1.1 dev veth1

Step 9: Enabling packet forwarding within the namespace:

sudo ip netns exec oai-ue1 sysctl net.ipv4.conf.all.forwarding=1

Step 10: Setting default policy for packet forwarding within the namespace to ACCEPT::

sudo ip netns exec oai-ue1 iptables -P FORWARD ACCEPT

Step 11: Configure the IMSI, Permanent Key and OPC

This part you will configure the UE parameters. The UE parameters file is /home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.conf. The first three lines of the file are composed by the IMSI, Permanent Key and OPC, as shown in figure below. You will configure these parameters.

ALT

You need to check in the docker-compose file (/home/dco1020/oai-cn5g-fed/docker-compose/database/oai_db2.sql) which SQL file the core is using. See figure below.

ALT

Verify/change the parameters in UE file (/home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.conf) according to the SQL file illustrated in figure below. The parameters are:

  • "ueid" refers to "imsi"
  • "encPermanentKey" refers to "key"
  • "encOpcKey" refers to "opc

ALT

To open UE file, type:

gedit /home/dco1020/openairinterface5g/targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.conf

To open Docker Composer file, type:

gedit /home/dco1020/oai-cn5g-fed/docker-compose/docker-compose-slicing-basic-nrf.yaml